The one stop solution for all your Windows related problems
You may see an error code indicating that CD-ROM support is being created to create a bootable disk. There are a number of steps you can take to resolve this issue, which we will cover shortly.
The following describes how to invoke a bootable boot with real-mode CD-ROM support, which is “mandatory” when doing a clean install.
from Windows 98. This is a “remake” on the way to alternative usescdboot The tool is available here on this site.Creating a better DOS boot floppy(A) From a real DOS command line
- Insert a blank 3.5″ floppy disk
- Click > Home in Programs > Click MS-DOS Prompt.
- Enter FORMAT A: /S and press [ENTER]
- When prompted for the volume label, press [ENTER]
- If you are prompted to “Format another?” Enter N and press [ENTER]
- Type EXIT and also press [ENTER]
(B) Via Windows Explorer in Win95
- Insert a blank 3.5″ hard drive
- Click Start > Point > Programs. Click Provoday Windows.
- Right-click the 3½ floppy icon [A:]> Press m to…
- Select the Copy Engine Files Only option > Click Start.
- After making sure the process is complete, click Close
Real mode CD support added.
There are four files that must be created on your boot floppy in order for the CD-ROM drive to be available when booting into DOS when it comes to the floppy:
- Real Mode CD Driver
- Microsoft’s MSCDEX program
- A tsr CONFIG.SYS file with an extra line that loads the AUTOEXEC CD driver.
- A single line .bat file that normally loads the MSCDEX TSR.
1- Real mode CD driver added.
How will you make CD drive as your first boot device?
Go into your computer’s BIOS settings and check if the optical drive is the first in the last.download duration.Insert the special rescue boot disk into the shared optical drive.Restart your computer.Be warned!Your computer must boot from a specific boot floppy.
By default, IBM installs all drivers in true CD mode, which can be activated from DOS, in the
C:WindowsCommand folder. In older versions of Aptivas, this file appears as IBMIDECD. On sys, newer systems, the initiator is VIDE-CDD.SYS.
In order to add CD-ROM support to a boot disk, it is usually necessary to add a copy of one of them to the disk previously mentioned files. This can be done using standard Windows procedures such as Copy > Drag & Paste, > Drop, Send > A:, etc., or alternatively using the following commands, which are
entered from a full DOS command line :
How do you make a boot CD?
Select your USB flash drive from one of the drop-down menus on your device.Click on the Select by all Boot selection drop-down menu and place the Windows ISO file.Give your USB drive a descriptive name in the volume label text box.Click Start.
If using Windows Control Options, note that *.SYS files are usually HIDDEN by default, make sure your system is set to show multiple files:
2- Added MSCDEX TSR CD.
To load CD support and optionally map a CD to a specific drive, you must add the drive letter MSCDEX.EXE to your hard drive set. This file is also located in C:WindowsCommand by default, and writing to disk can be achieved using standard Windows procedures such as copy > paste or send to > A:, or by using the following processing provided by the command, including output: Command line in DOS:
The system CD CONFIG.File should be added to help the floppy contain a string that will help you load the real mode memory cd driver when the PC boots from the floppy.
- Open Windows NotePad.
- Enter one of the following old lines:
In Aptivas with driver IBMIDECD.SYS:
DEVICEHIGH=A:IBMIDECD.New System /d:ibmcd001
on Aptivas with VIDE-CDD.SYS driver:
- Click File> Click Save As
- In the Save drop-down menu, also select drive A.
- In the named collection, enter “config.sys” (including the quotes).
- Click the My Backup button.
Note that the files organized in steps (3) and (4) can also be created in native DOS using the DOS EDIT.COM text editor if needed (or if you don’t have access to it when creating the sneaker disk) . More:
Quickly type EDIT in the command and press [ENTER] to launch the DOS Text Writer. > Enter the appropriate text. > Press ALT+F to bring up the File menu. > UseUse the down arrow key to highlight Save. > Press [ENTER]. ] > After “File Name” enter the name of the file they all create, either A:CONFIG.SYS and/or possibly A:AUTOEXEC.BAT Press > [ENTER] > Press again ALT+F > Use key down arrow to highlight Exit Press > [ENTER]
Typically, an AUTOEXEC.BAT file would need to be added to the floppy containing the actual string to load the TSR MSCDEX real mode CD into memory, in addition to setting the CD drive letter mapping when the PC boots to use the floppy disk.
- Open Windows NotePad.
- Enter string:
LH to A:MSCDEX.EXE /D:IBMCD001 /L:x
How do I make a Windows 98 boot CD-ROM?
If you use Windows to create a boot shoe and a Windows 98 floppy, you get all the necessary downloads or downloads, as well as CD support. To build a Windows 98 boot disk, click Start, Settings, Control Panel, double-click Add/Remove Programs, select the type of boot disk, and create the file.
Note. x above = custom CD drive letter.
- Click File> Click Save A
- In the “Save to” section, swipe down and select drive A.
- In the field “autoexec.bat” enter (add current quotes)
- Click the “Save” button
Note that you can assign at most one drive letter to a CD if you want that drive letter to receive all drive letters. Conversion /L:x may be omitted, in which case CD-ROM Launch My Computer (go to Start and select My Computer).Right-click on the 3.5″ drive icon and select Format from the tree menu.Select “Create a new MS-DOS disk” and click “Start”. Click here to see the image.Click OK when XP comes to you for confirmation.Click “Close” once XP has finished creating the drive. Many MS-DOS command line utilities can be added to help you with your boot disk
effectively assigned to the first unshifted drive letter
How do I create a DOS boot disk?
to make this tool particularly useful. Just to completely fix Windows 98 to the bare minimum, I highly recommend the FORMAT.COM and FDISK.EXE utilities in addition to those planning to install Win98 from their hard drive rather than from this CD
Launch My Computer (go to Start and select My Computer).Right-click on the 3.5″ drive icon and select Format from the tree menu.Select “Create a new MS-DOS disk” and click “Start”. Click here to see the image.Click OK when XP comes to you for confirmation.Click “Close” once XP has finished creating the drive.
Many MS-DOS command line utilities can be added to help you with your boot disk
Creazione Del Supporto Per Il Cdrom Del Disco Di Avvio
Sozdanie Podderzhki Zagruzochnogo Diska Cdrom
Criando Suporte A Cdrom De Disco De Inicializacao
부팅 디스크 Cdrom 지원 생성
Skapa Stod For Startskivor
Ondersteuning Voor Opstartschijf Cd Rom Maken
Creacion De Soporte De Cdrom De Disco De Arranque
Erstellen Einer Bootdiskette Cd Rom Unterstutzung
Creation De La Prise En Charge Du Cdrom Du Disque De Demarrage
Tworzenie Obslugi Cdromu Dysku Startowego